Wi-Fi Homeplug 500 Mbps

Wi-Fi Homeplug 500 Mbps

LN-554 v1 001

 
Back

How do I access the settings menu of my Wi-Fi Homeplug? (Apple Mac OS)

How do I access the settings menu of my Wi-Fi Homeplug? (Apple Mac OS)

What is the settings menu of my Wi-Fi Homeplug?

In the settings menu (also known as the Graphical User Interface, or GUI), you can manage the settings of your Wi-Fi Homeplug. The settings that can be changed include changing the network password, changing the network name and selecting various types of security. 

You can only access the GUI via your internet browser (Internet Explorer, Google Chrome, Mozilla Firefox, etc.). 

 

How can I log in to the settings menu?

To do this, follow the steps below.

Before you start

Check that your Homeplugs are switched on and have been installed correctly. Then check whether the wireless device (such as your tablet or laptop) that you wish to use to log in has got a connection with your Wi-Fi Homeplug. If you don't have a connection, you will be unable to log in. 

To check this, open the list of your wireless networks.

For Apple/Mac OS devices: click on the network icon at the top right   (using the left-hand mouse button). The screen below will be displayed. This is a list of the wireless networks that your Apple device has found.

A list of the wireless networks will then be displayed. Look for the network provided by your Wi-Fi Homeplug and make sure you are connected to that network.  

 

The network name of your Wi-Fi Homeplug can be found on the back label of your Homeplug (the sticker on the rear) and on the Info Flyer supplied (unless you previously changed the network name). 


 

If you are not yet connected via that network, double click on the network name where it appears in the list of wireless networks. Your device will then set up a connection. You will be asked to enter the network security key.


  
Unless you have previously changed it, the network security key will be the WPA2 code that can be found on the back label of your Homeplug and on the Info Flyer supplied. 

 

Enter the WPA2 code and a connection will then be created.

Logging in to the settings menu

1.    Open the log-in page using your internet browser.

Open your internet browser, such as Internet Explorer, Google Chrome or Mozilla Firefox. Type the following address: http://sitecom.plug.


 

2.    Log in using the correct log-in details.

A log-in screen will now be displayed. Enter the following information:

•    Username: admin (in lower-case letters).
•    Password: the WPA2 code (as printed on the back label and the Info Flyer).


 
Important: if you previously changed the log-in password, enter the password that you created. 

Then click on OK. You will now be taken to the settings menu Home page.

Done! You finished all the steps!

Back to start ›
Previous step
1 2 3
Next step

Rate this anwer. This answer is:

Good, it was clear
Not good, it was not clear

More information

See other FAQs ›
Need extra help? Click here for our service options. ›